MediaMaking
Matte Box DP500 Mark III
Matte Box DP500 Mark III
Matte Box DP500 Mark III is a professional device universally designed to accommodate all DSLR and video camcorders and it compatible with any industry standard 15mm rail system.
Specifications
Support maximum of 14mm ultra-wide-angle lenses or large lenses up to 114mm in diameter
Compatible with 4X4 Square filters in thickness of 1mm-2mm, it also supports 4X4 filters up to 4mm in thickness, which enable some high-quality filters to be used. One of filter holder could be 360 degree rotated

Request information or quotation:

* requested

rent and collect

Skylite panel

Skylite panel The Joe McNally Skylite contains a standard aluminum frame Lastolite 1,1 m x 1,1 m plus a new diffuser panel” sliding” from -2 stops. The telescopic support can hold the frame Skylite and up to 4 flash mounted on skids sliding distance or you can...

Monopod

Monopod Specifications Mount 1/4" Load capacity 3 kg Weight 270 g Max. Height 1710 mm Min. Height 550 mm Closed lenght 560 mm

Image stabilizerTrack slider

Image stabilizerTrack slider Track Slider compatible with fluid heads 3/8". Specifications Width 1,5 m Maximum load 7 kg

Matte box Kit

The Cavision MB4510S is a wide 16×9 Hard Shade Matte Box for Sony PMW-EX1 and EX3.

MediaPro Camera Cage for Sony a7/a7r/a7s

The sturdy handle allows front and back positioning as per your shooting needs, cable clamp prevents accidental cable disconnects.

Zacuto Double Barrel

Zacuto Double Barrel The Double Barrel is a system to handle a shoulder that offers many possibilities to use the video operator, is also equipped with a double grip to allow a better stabilization of the frame and to give the possibility to mount and sostenenre also...

Ikan EC1 Beholder Stabilizer

The Beholder EC1 is designed specifically for professional filmmakers looking for a single handheld stabilizer for a large range of medium and small cameras weighing up to 2 kg. The Beholder EC1 is lightweight and easy to use!

Crane 3,6 m

3.6 m Crane that allows you to raise and lower the camera evenly for stable and smooth shots in an infinite number of 360-degree arcs.

MediaPro Quick DSLR Cage

MediaPro Quick DSLR Cage is suitable for all light camrecorders and DSLRs and ideal for professional or amateur cameramen/filmmakers.

MediaPro LCD Mounting Arm

Suitable for monitors preview up to 7″

MediaPro Flycam

MediaPro Flycam is stabilizer quick and easy to set up and balance, and it can be used as a Monopod.

MediaPro Matte Box

With the Matte Box can protect your camera from sunlight during shooting, and then avoid the glare of the lenses. This ensures professional results.

Autopan

Autopan AutoPan by Shootools is the first practical electronic panning system that can be used universally to any slider of each length and brand; simple to use is fully programmable according to the specific needs of the...

Image stabilizer HandyMan

Image stabilizer HandyMan The versatile Handy Man for DV / HDV cameras. For cameras from 2 kg to 2.8 kg – optionally with weights up to 3.5 kg. Specifications Dimensions (W x H) 52 x 28 cm Weight 1,6 kg Load capacity 3, 5...

MediaPro Cube Camera Cage

MediaPro Cube Camera Cage is a high-strength cage that adds the ability to connect accessories.

Smart Slider Pro 1300

Smart Slider Pro 1300 Consists of two parts, the motor (DigiMOTOR PRO) and the drive system (DIGIDRIVE), can be mounted on SLIDER Pro 1300 transforming it into a motorized system, usable with a PC or controller. The innovative handling...

Mega Chimera

Mega Chimera equipped with wheels with the possibility of putting up to 2 1000w lights.

Image stabilizer Steadystick

Image stabilizer Steadystick Steady Stick provides you with relief from the strain of extended periods of handheld shooting by removing the weight of the camera from your shoulder and back. Specifications Load capacity 13.6 kg lenght Open: 23" Folded: 19" Head...

Motorized Pan Head

Motorized Pan Head The Bescor MP-101 attaches between a tripod and camera and enables panning and tilting the camera remotely Specifications Dimensions 14.7 x 11.4 x 10.2 cm Weight 770 g Power source 4x included 1.5-volt AA batteries Payload 2,7...

Crane arm JB 2.7

Crane arm JB 2.7 2.7 m Crane JB, with possibility of mounting on a tripod, bullstand or stand. Specifications Folding arm Capacity load 4,5 kg Transport dimensions 120x10x30 cm Weight 5 kg

Crane arm JB 3 m

3 m Crane JB, with possibility of mounting on a tripod, bullstand or stand.

MediaPro Car Suction Mount

Car suction cup mount that securely attaches firmly on the car’s glass, on the dashboard or on the roof. In addition, it not only supports cameras, but also offers the best performance to prevent flickering and slipping during shooting.

Matte Box DP500 Mark III

Matte Box DP500 Mark III is a professional device universally designed to accommodate all DSLR and video camcorders and it compatible with any industry standard 15mm rail system.

MOTOR Pro 1300

MOTOR Pro 1300 DigiMOTOR PRO, along with DIGIDRIVE, lets you turn any SmartSLIDER PRO in a real motor system with Digital Motion Control. Specifications Engine industrial-Low Noise equipped with encoder Absolute precision angular positioning (0.0000073 °) Very high...

Ronin MX

The Ronin-MX includes all the features of Ronin Ronin and-M, that is, three modes of operation, built-in receiver and remote control, and is also compatible with DJI Assistant 2 and DJI GO, to check the settings of the universal joint.

MediaPro Base Plate Cage for Sony PXW-FS7

This cage is the designated for the Sony FS7 camera. This comfortable shoulder pad provides a better support. 15mm rods clamps are found on the front and back for mounting accessories.